Metal case

14.5 cm x 35 cm x 47 cm (5.75 in x 13.75 in x 18.5 in)

7.5 kg (16.5 lbs)

100 V ac, 115 V ac, 230 V ac, 50 Hz / 60 Hz, universal input
100 V/115 V: 20 VA
230 V: 30 VA

Monochrome 240 pixels x 64 pixels, 8 lines x 40 characters, white LED backlight

6 (1 fixed, 5 soft-defined) and rotary selector knob

10 °C to 40 °C (50 °F to 104 °F)

-20 °C to 60 °C (-4 °F to 140 °F)

10 % to 90 % non-condensing

2000 m maximum

IEC60529:IP20

IEC CISPR11: Group 1, Class A. Group 1 have intentionally generated and/or use conductively coupled radio-frequency energy which is necessary for the internal functioning of the equipment itself. Class A equipment is suitable for use in nondo¬mestic locations and/or directly connected to a low-voltage power supply network

Intentional Radiators
This device complies with part 15 of the FCC Rules. Operation is subject to the follow¬ing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (15.19) Changes or modifications not expressly approved by Fluke could void the user's authority to operate the equipment. (15.21)

Overvoltage category II, pollution degree 2

Measurement 5,000 V

FCC ID: X3ZBTMOD3

IC: 8828A-MOD3

CE0051

Cut and coag waveforms, monopolar and bipolar outputs

True RMS

3 MHz at -3 dB including loads – See User’s Manual Supplement for more information

0.2 seconds to 4.0 seconds from Foot Switch activation to start of measurement

10 seconds on, 30 seconds off, at 100 W, all loads

10 seconds on, 30 seconds off, at 400 W

Cut and Coag

0 Ω, 10 Ω, 20 Ω, 25 Ω to 2500 Ω (by 25 Ω), 2500 Ω to 5200 Ω (by 100 Ω)

± 2.5 %

10 Ω: 300 W, 20 Ω to 2900 Ω: 400 W, 3000 Ω to 5200 Ω: 200 W

10 Ω: 300 W, 20 Ω to 2400 Ω: 500 W, 2425 Ω to 2900 Ω: 400 W, 3000 Ω to 5200 Ω: 200 W

0 mA to 5,500 mA

±(2.5 % of reading + 1 mA)

10 kV Peak to Peak

±(10 % of reading + 50 V)

1.4 to 16.0 Defined as the ratio of Peak voltage to RMS voltage (Vpk /Vrms), using the larger of the 2 peaks (positive or negative)

0 mA to 5500 mA

±(2.5 % of reading + 1mA)

200 Ω

± 2.5 %

400 W

200 Ω

0 mA to 5500 mA

±(2.5 % of reading + 1 mA)

0 Ω to 475 Ω (by 1 Ω)

0 Ω to 10 Ω 0.5 Ω, 11 Ω and above 5 %

0.5 W

1 to 5 seconds

Micro B connector, full speed

802.15, Speed: 115,200 baud

5,000

retained through power cycling

Traceable to the International System of Units (SI) through the appropriate National Metrology Institutes such as NIST or through intrinsic standards.